7 Best Brass Cabinet Pulls 2026: Tested and Ranked

A whole-kitchen hardware swap is mostly a math problem, and this 30-pack solves it neatly: 30 pulls, each with 3-inch hole centers and a 5-inch overall length. That is the spacing most cabinet doors and drawers arrive with, so if you are replacing an old bar pull, the odds are good that these drop into the existing holes. We also like the round bar profile. It is easy to grab, and it lets the brushed brass finish do the talking without looking busy.

The finish is the strongest argument for this set. Brushed brass can read orange in the wrong light; this one is warm and restrained, and it sits comfortably beside stainless appliances and champagne bronze faucets. We noted that the pulls are stainless steel with a brass finish, not solid brass. That is normal for the price tier and it keeps the 30-pack affordable; the finish, not the metal underneath, is what you are buying.

Installation is straightforward, and the included short and long screws cover common drawer-front thicknesses. Do not skip the measure-and-mark step: 3-inch spacing is common, but it is not universal, and a 5-inch overall length tells you nothing about the hole spread. For a full kitchen, that combination of standard fit, warm finish, and a box large enough to cover every cabinet is hard to beat. The extra pulls also give you a spare for the drawer that gets pulled hardest.

The T-shaped bar is what sets this set apart from the sea of round pulls. The 3-inch hole spacing and 5-inch overall length are familiar, but the flatter face gives a more modern, architectural line, especially on flat-front cabinets. We like the way the brushed brass warms up white or gray cabinets without turning them into a brass showpiece.

The 30-pack is aimed at a full kitchen, and this is the budget option in the group. The trade-off is weight: these are lighter than the solid zinc pulls, and you feel it most on a wide drawer. On upper cabinet doors, that lightness is easy to forget once the pull is screwed down. Two screw lengths are included, which helps with common drawer fronts.

For a fast, low-cost refresh, we think the shape and finish are worth more than the missing heft. This is the set we choose when the cabinets are simple, the budget is tight, and the goal is a cleaner line rather than a heavier feel. Plan to mark your holes carefully; a template makes the job faster than measuring each pull by eye.

The extra overall length is the first thing you notice. These pulls have 5-inch hole centers but stretch to 6 inches overall, so they leave more room for your fingers than a compact 5-inch bar. The rectangular profile is crisp and modern, and the brushed gold finish has enough warmth to avoid looking like polished chrome.

We like the solid zinc alloy body. It gives the pull a planted feel, and the 20-pack is sized for a large kitchen or a kitchen plus a bathroom vanity. The individually wrapped pieces are a small touch we appreciate because they arrive without scuffs. The longer profile also makes a bigger difference on wide drawers than another round bar.

If your cabinets already have 5-inch holes and you want a more substantial handle, this is the set we recommend. The brushed gold tone is warm without going yellow, and the rectangular shape feels more deliberate than a plain bar. It is the one we reach for when the hardware should feel as considered as the cabinets.

Nonstandard holes are the reason this pull exists. The Adjusta-Pull slides across a range from 1-3/8 to 4 inches center to center, so it can reuse the holes in an older dresser, a vanity, or a cabinet run where a fixed 3-inch or 5-inch pull does not line up. We like that it solves a fit problem without asking you to drill fresh holes and fill the old ones.

The champagne bronze finish is softer and less yellow than most brushed brass, which makes it a good match for warmer faucets and older furniture. The zinc body has a pleasing weight, and the bar profile is simple enough to disappear into a traditional piece. The included screws are not the strongest part of the package; use a hand screwdriver and check the length before tightening, especially on a thin drawer front.

The adjustment mechanism is the reason this one stays in the roundup. It turns a mismatch into a fit, and the result looks like a chosen pull rather than a patched hole. We choose it for the awkward piece, not as the default for a whole kitchen.

Individually wrapped pulls are a small luxury, but they tell you something about how this set is put together. Each 5-inch pull arrives protected, and the 6.5-inch overall length gives it a longer, more architectural profile than the standard 5-inch bar. The solid zinc body has real heft.

We like the way the longer bar feels on a wide drawer: there is more room to grab, and the 1.2-inch projection keeps your knuckles clear of the drawer face. The brushed brass finish is warm and even. The two screw lengths are useful, but the screws themselves are not the star; use a hand driver and check the threads before you commit.

The 10-pack is aimed at a bank of large drawers, a dresser, or a kitchen island rather than a whole kitchen. That is a fair trade for the heavier body and the longer profile, which are the reasons to consider this set at all. It is not the quietest hardware in the group; it wants a little attention.

Where this one wins is presence. On a bank of large drawers, the extra length and solid weight make a stronger impression than another standard bar. We choose it for an island or dresser where the hardware should be noticed, and the long profile is the reason it earns that role.

Twenty-five pulls in one box is the appeal here. With 5-inch hole centers and a 5-1/2-inch overall length, this set is aimed at a full run of large drawers or a kitchen where you want the longer bar without paying premium prices. The square profile has a clean, modern look, and the brushed brass gold finish is richer than the price tier suggests.

The body is hollow stainless steel, not solid zinc, and that shows up in the hand. We noticed the lighter feel immediately, especially next to the solid pulls in this group. Once mounted, it is less of an issue on upper cabinets, but on a wide drawer the difference is noticeable. Installation is straightforward with the included screws.

The 25-count gives you room for a full run of drawers with a few spares, and the square bar is easy to wipe down. We like this set most on flat-front cabinets where the square profile can repeat cleanly. It is the one we choose when the 5-inch look matters and the budget is fixed.